Newest Products

The DIY TinyTV Kit assembles easily in less than 5 minutes with no soldering or special tools required. Load up to 5 hours of your own videos, movies, and TV shows easily using our TSVconverter-a free tool to convert any MP4 file. Then load the files onto the included MicroSD card, sit back and relax and enjoy hours of entertainment! 

The TinyTV DIY Kit is 3D printed, has 4 push buttons and an ON/OFF switch and it also comes with the TinyRemote, so you can easily change channels, power on or off and adjust the volume. The TinyTV comes in white but is also customizable with acrylic paint or even metallic sharpies. Check out our Customizing your DIY TinyTV Kit tutorial! 

• Arduino-compatible platform with a powerful 32-bit ARM processor
• A beautiful and vibrant full-color OLED screen
• MicroSD card included and preloaded with content 
• 3D Printed TV with 4 push buttons and ON/OFF switch 
• Built-in speaker 
• Rechargeable lithium battery
• USB port for charging and software updates
• Wireless TinyRemote with battery

• Converting videos to the TinyScreen video format (tsv) is simple, just run them through the TSV video converter and put them onto the microSD card to play them back. 
• A micro USB cable is not included in the kit.   

The TinyTV DIY Kit is simple to put together - there is no glue, soldering or special tools needed. It only takes about 5 minutes before you can sit back, relax, and enjoy your favorite movies, videos and TV shows from anywhere.

• Step by step assembly instructions are available here, or you can watch the assembly video: 

• TinyTV Enclosure 3D files
• TinyTV Arduino Firmware

This TinyLily LED Variety Pack includes a mixture of all of our sewable LEDs so you can create some really cool wearable projects. 

This kit includes the following items:

•  Five TinyLily RGB LEDs
• Twelve TinyLily 1206 LEDs - 4 Green, 4 Red, 4 Amber
• Twelve TinyLily 0402 LEDs - 4 Green, 4 Red, 4 Amber 

TinyLily LED 0402

• Washable
• Two Sewtabs – 1.2mm in diameter, easy to use with standard conductive thread and needles
• Robust Gold Finish – makes soldering easy and is non-corrosive

Power Requirements

• Voltage: 3.0V - 5.5V 
• Current:
• 1.5mA per LED (3.0V)
• 5.0mA per LED (5.0V)

Dimensions

• 6.5mm x 2.5mm (0.26 inches x 0.1 inches)
• Max Height: 1.11mm (0.044 inches)
• Ultra-thin 0.61mm (0.024 inches) PCB
• Weight: .02 grams (0.0007 ounces) 

TinyLily LED 1206

• Washable
• Two Sewtabs – 1.2mm in diameter, easy to use with standard conductive thread and needles
• Robust Gold Finish – makes soldering easy and is non-corrosive

Power Requirements

• Voltage: 3.0V - 5.5V 
• Current:
• 1.5mA per LED (3.0V)
• 5.0mA per LED (5.0V)

Dimensions

• Dimensions: 10.2mm x 4mm (0.40 inches x 0.18 inches)
• Max Height: 1.44mm (0.057 inches)
• Ultra-thin 0.61mm (0.024 inches) PCB
• Weight: .06 grams (0.002 ounces)

TinyLily RGB LED

• Washable
• Four Sewtabs – 1.2mm in diameter, easy to use with standard conductive thread and needles
• Robust Gold Finish – makes soldering easy and is non-corrosive

Power Requirements

• Voltage: 3.0V - 5.5V 
• Current: (depends on color and brightness)
• Red: 30mA
• Green: 20mA
• Blue: 30mA
• White: 65mA

Dimensions

• Dimensions: 10mm diameter(0.394 inches)
• Max Height: 2.5mm (0.1 inches)
• Ultra-thin 0.61mm (0.024 inches) PCB
• Weight: .192 grams (0.007 ounces)

TinyLily 0402 LED 

• Schematic
• Eagle Files
• Example Arduino Sketch

TinyLily 1206 LED

• Schematic
• Eagle Files 
• Example Arduino Sketch

TinyLily RGB LED 

• Schematic
• Eagle Files
• Example Arduino Sketch

This TinyLily Mini Starter Kit lets you really get going to create some cool projects with the TinyLily Mini!

This kit includes the following items:

• TinyLily Mini Processor Board - Runs your Arduino programs 
• TinyLily Mini USB Adapter - Used to communicate with your TinyLily Mini from your computer and upload new programs
• TinyLily Battery Charger - Lets you charge your LiPo batteries with a USB cable. 
• TinyLily Switch - Sewable Switch for your projects
• TinyLily Battery Adapter - Lets you plug in small Li-Ion batteries to your TinyLily Mini so your project can go wireless!
• Lithium Ion Polymer Battery- 3.7V 150mAh
• TinyLily 1206 LEDs -Twelve Total: 4 Green, 4 Red, 4 Amber
• TinyLily 0402 LEDs -Twelve Total: 4 Green, 4 Red, 4 Amber
• Five TinyLily RGB LEDs
• One Sewing Kit with 32 ft. Conductive Thread - Includes two sewing needles.
• One Micro USB Cable- 3ft.     

This TinyLily Mini Basic Kit has the bare essentials to get going with the TinyLily e-Textile platform.

This kit includes the following items:

• TinyLily Mini Processor Board - Runs your Arduino programs.
• TinyLily Mini USB Adapter - Used to communicate with your TinyLily Mini from your computer and upload new programs.
• Two TinyLily RGB LED
• Six TinyLily LED 0402 (Two of each color - Red, Green, Amber) 
• Six TinyLily LED1206 (Two of each color - Red, Green, Amber)
• One Sewing Kit with 16ft. Conductive Thread - Includes two sewing needles. 
• One Micro USB Cable- 3ft.  

This Sewing Kit with Conductive Thread has the bare essentials to get you going on your next wearable project!

This kit includes the following items:

• Conductive Thread - Available in either 16 / 32 / 64 ft. 
• Two sewing needles - Hand sewing needles, steel and nickel plated. 
• One needle threader
• Two buttons
• Additional thread - 3ft. of each color Pink, Blue, Silver, Brown, White, Black. 
• One safety pin

• Conductive thread is available in either 16 / 32 / 64ft. 
• Conductive Thread is made from Stainless Steel Fibers
• Conductive Thread Resistance: 28 Ohms/ft

• This thread can be slightly more difficult to work with in close, fine conditions. Our resident E-Textiles expert suggests waxing the thread for hand sewing, as this should take care of any 'hairy thread' issues.
• Since waxing is impractical in machine sewing applications, avoid sewing close connections by machine as the 'hairs' could potentially short across small distances.

Spun from stainless steel fiber you can use it as a creative way to connect various electronics onto clothing projects. These spools are a great way to get into wearable electronics without a large upfront cost and come in large enough quantities to not be afraid of making a few mistakes.Great for artists, crafters, designers, hobbyists and robotics enthusiasts alike.

What sets this thread apart from others is the fact that it's actually spun from stainless steel fibers (as opposed to plated silver) and doesn't have a Nylon core. This means that while it may not be easy to solder to, because it's stainless, it also won't burn up when you touch it with a soldering iron. Perfect for your next project as it allows wearable clothing to remain wearable and washable!

• Made from Stainless Steel Fibers
• Resistance: 28 Ohms/ft

• This thread can be slightly more difficult to work with in close, fine conditions. Our resident E-Textiles expert suggests waxing the thread for hand sewing, as this should take care of any 'hairy thread' issues.
• Since waxing is impractical in machine sewing applications, avoid sewing close connections by machine as the 'hairs' could potentially short across small distances.

Comfortable, casual and loose fitting. Designed by Makers, for Makers! This updated unisex essential fits like a well-loved favorite. Featuring a crew neck, short sleeves and designed with superior Airlume combed and ring-spun cotton that acts as the best blank canvas for printing our TinyTee's. 

100% No Sweatshops & Eco-Friendly!

Fabrication: 99% Airlume combed and ring-spun cotton, 1% poly

Features: Sideseamed. Retail fit. Unisex sizing. Shoulder taping.

This TinyShield is designed specifically for the TinyScreen+ to allow for video playback in a very compact package.  This TinyShield adds a microSD Adapter to store video and image files, an audio amplifier for driving a speaker, and an IR receiver.  The 16x9 speaker is also included with this board and can be connected to the speaker port.  

Note: This does not include the microSD card (sold separately), you can get a compatible microSD card here.  

To learn more about the TinyDuino Platform, click here

microSD Specs

• Uses standard Arduino SD Card Library
• Supports most standard microSD cards and SDHC cards- cards larger than 8GB may not work!

Power Requirements

• Voltage: 3.0V - 5.5V 
• Current: up to approximately 100mA while reading from microSD card 

Pins Used

SPI Interface for microSD card:

• 10 - CS: This signal SPI chip select for the microSD card
• 11 - SCLK: This signal is the serial SPI clock out of the TinyDuino and into the microSD card.
• 12 - MISO: This signal is the serial SPI data out of the microSD card and into the TinyDuino.
• 13 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the microSD card.

Additional:

• A0 - DAC Output: Analog output for audio amplifier

• 3 - IR Input: Output signal from infrared receiver 6.8 3.6

Dimensions

• 25.8mm x 25.0mm (1.02" x 0.98") Note: microSD car overhanges the edge by approx 3mm for easy removal
• Maximum height of board: 3.6mm (0.14") 
• Thickness with TinyScreen+ attached: 6.8mm (0.27")
• Weight (TinyShield only): 1.62 grams (0.06 ounces)

• This TinyShield is designed specifically for the TinyScreen+ and may not properly mate with other TinyShields or processor boards.
• This does not include the microSD card (sold separately), you can get a compatible microSD card here.

• Arduino SD Card Library (built in the Arduino IDE)
• Schematic
• Eagle Files

This Tiny Video Player Kit lets you create a TinyScreen+ video player in an extremely small form factor. The OLED is a brilliant 16-bit color 96x64 pixel display, capable of up to 40 FPS 16-bit color video playback from a microSD card, with single-channel line-level audio output!  The TinyScreen+ is preloaded with software to allow for video playback, and a speaker, battery and microSD card with examples videos are provided. Just turn it on and it will start playing back the videos.  

This kit includes the following items:

• TinyScreen+ Processor Board - Runs the program, has a SAMD 32-bit processor, OLED screen, USB and power circuitry.
• microSD / Audio TInyShield - Designed specifically for use with the TinyScreen+, this TinyShield has the microSD card adapter, audio driver and IR receiver (which can receive TV remote control signals).
• 290 mAh Rechargeable Lithium Polymer Battery - Used to power your video player, and is recharged when the USB is plugged into the TinyScreen+ board.  
• 16x9 Speaker - for audio playback on videos
• 8GB microSD card and Adapter - preloaded with sample videos. 

To learn more about the TinyDuino Platform, click here

• Converting videos to the TinyScreen video format (tsv) is simple, just run them through the TSV video converter and put them onto the microSD card to play them back. 
• A micro USB cable is not included in the kit.