0.96" OLED Screen Wireling

This Wireling lets you display text and images via a 0.96" OLED Display! This 128x64 pixel screen features white pixels on a black background and is controlled via the I²C bus. 

The screen uses an internal boost converter to achieve the higher voltages required to drive the screen, so there's no additional external hardware required! 

ER- OLED0.96-1W Specs

• 128x64 pixel resolution 
• 0.96" size (measured diagonally)
• White Monochrome
• Internal boost converter 
• I²C Interface 

TinyDuino Power Requirements

• Voltage: 3.0V - 5.5V 

Pins Used

• A5/SCL - I2C Serial Clock line
• A4/SDA - I2C Serial Data line

Dimensions

• 27mm x 21mm (1.06 inches x 0.827 inches)
• Max Height (from lower bottom of Wireling to upper top Wireling Connector): 5.00mm (0.197 inches)
• Weight: 1 gram (.04 ounces)

• You can also use this shield without the TinyDuino – by clipping the connector off the opposite end and soldering the wires to another board, you can use it with the microcontroller or development board of your choosing!

• SSD1306 0.96 Screen Datasheet
• Schematic
• Eagle Files