Components

Do you need some batteries? Some connectors? How about a set of wheels or an enclosure box? We have that and more. This is the one stop shop for all the extra components/accessories you could need for your next project.

2 Pin Connector JST-SH Female

from

$ 0.99

This is the same connector that can be found on our batteries and speakers. This connector is pre-wired with your choice of 50mm or 100mm wire length.

Learn More →



Add motion to your TinyDuino project! This gear motor uses the same JST connector that can be found on our Dual Motor TinyShield, meaning it can be plugged right in without any soldering or crimping.

Learn More →



These connectors are commonly used on micro servos and other RC equipment. You can use it supply power or PWM signals to or from your TinyDuino Project and interface with standard lightweight radio control components

Learn More →



Add motion to your TinyDuino project! This gear motor uses the same JST connector that can be found on our Dual Motor TinyShield, meaning it can be plugged right in without any soldering or crimping.

Learn More →



Add motion to your TinyDuino project! This wheel has a grippy rubber tire for good traction and has a strong plastic center hub, which makes it perfect for robotics projects.

Learn More →



Add motion to your TinyDuino project! This wheel has a grippy rubber tire for good traction and has a strong plastic center hub, which makes it perfect for robotics projects.

Learn More →



Mounting kit for mounting up to 4 TinyDuino Boards / TinyShields together in a stack. This kit contains four screws, four nuts, and twelve 3mm spacers for in between the boards.

Learn More →



Add huge amounts of storage to your TinyDuino projects by using the 8GB microSD card, with Adapter to standard SD Card size.

Learn More →



Add huge amounts of storage to your TinyDuino projects by using the 8GB microSD card, with Adapter to standard SD Card size.

Learn More →



Sometimes you need a good old fashioned breadboard to easily test a circuit. Now you can make truly minuscule prototypes using these miniature breadboards.

Learn More →



Sometimes you need a good old fashioned breadboard to easily test a circuit. Now you can make compact prototypes using these mini breadboards.

Learn More →



This adapter allows you to drive standard 12mm hex RC wheels or anything else that uses a 12mm hex drive.

Learn More →



This is the 3D printed enclosure (both the top and bottom haff), and a watch wrist strap to use to create a TinyScreen Smart Watch.

Learn More →



Need a way to mount our gear motors to your project? Look no further. This plastic mount holds the motor tight and mounts securely with two included screws and nuts.

Learn More →



What project would be complete without magnets? These magnets can help you do anything from hold something shut, to detecting the position of something with a hall effect sensor. They're neodymium magnets, so don't let their small size fool you. They pack a big punch!

Learn More →



If you need high torque and precision in a small package, this is the servo to get. It is a digital servo so position accuracy is second to none, and it has metal gears.

Learn More →



If you need high torque and precision in a tiny package, this is the servo to get. It is a digital servo so position accuracy is second to none.

Learn More →



This is the best 2.5g servo we've found so far. If you need high torque and precision in a truly tiny package, this is the one to get. It is a digital servo so position accuracy is second to none.

Learn More →



This is the same connector that is used on servos and other RC equipment. You can use it supply power or PWM signals to or from your TinyDuino Project and interface with standard radio control components.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 1100mAh at 3.7V.

Learn More →



This is a tiny rechargeable Lithium ion polymer battery that fits perfectly behind the TinyDuino Processor board to power your projects. The battery has a capacity of 150mAh at 3.7V.

Learn More →



This is a rechargeable Lithium ion polymer battery that can power your projects. The battery has a capacity of 290mAh at 3.7V.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 500mAh at 3.7V.

Learn More →



This is a tiny rechargeable Lithium ion polymer battery that fits perfectly behind the TinyDuino Processor board to power your projects. The battery has a capacity of 70mAh at 3.7V.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 850mAh at 3.7V.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 1000mAh at 3.7V.

Learn More →



This is a standard USB A to micro B USB cable, which can be use to connect up your TinyDuino or TinyLily to your computer. 3 feet / 1 meter long.

Learn More →



Is your TinyDuino looking a little bare? Stick it in a plastic enclosure box to protect it and give your project a clean look! This enclosure box is made of sturdy black plastic, which makes it easy to cut and drill. It also makes this little box tough! The two halves are assembled with two steel screws to hold it together.

Learn More →



Is your TinyDuino looking a little bare? Stick it in a plastic enclosure box to protect it and give your project a clean look! This enclosure box is made of sturdy black plastic, which makes it easy to cut and drill. It also makes this little box tough! The two halves are assembled with two steel screws to hold it together.

Learn More →



This is one of the easiest ways to add some color to your TinyDuino project. These crystal clear 3mm LEDs are already wired with a built in current limiting resistor, so all you need to do is solder the pre-tinned wires to a power source.

Learn More →



This rechargeable Lithium Ion Polymer Battery is a cylindrical 18650 cell that is typically used in everything from small flashlights to electric cars. The battery has a capacity of 2500mAh at 3.7V, the voltage can range from 4.2V when fully charged to 3.0V when completely discharged.

Learn More →