Lithium Ion Polymer Battery - 3.7V 70mAh
Lithium Ion Polymer Battery - 3.7V 70mAh quarter size comparison
Lithium Ion Polymer Battery - 3.7V 70mAh
Lithium Ion Polymer Battery - 3.7V 70mAh
Lithium Ion Polymer Battery - 3.7V 70mAh quarter size comparison
Lithium Ion Polymer Battery - 3.7V 70mAh

Lithium Ion Polymer Battery - 3.7V 70mAh

ASR00011

19 in stock
$ 4.95 Save $ -4.95
OR
DESCRIPTION

This is a tiny rechargeable Lithium-ion polymer battery that fits perfectly behind the TinyDuino Processor board to power your projects. The lipo battery has a capacity of 70mAh at 3.7V, the voltage can range from 4.2V when fully charged to 3.0V when completely discharged. The battery includes protection circuitry to protect the battery from overcharging or completely discharging.

This lipo battery includes a micro JST SH connector, which is used on TinyCircuits products that support Lithium-ion batteries.

 

TECH SPECS
  • Nominal Voltage: 3.7V
  • Nominal Capacity: 70mAh
  • Max Charge Current: 70mA (1C)
  • Max Discharge Current: 70mA (1C)
  • Dimensions: 15.0±3.0mm x 15.0±2.0mm x 5.0±0.5mm (0.591±0.118" x 0.591±0.079" x 0.197±0.020")
  • Wire Length: 26.0±5.0mm (1.024±0.197")
  • Weight: 1.90 grams
  • Battery Connector: JST SHR-02V-S-B
  • Mating Connector: JST SM02B-SRSS-TB(LF)(SN)
NOTES

70mAH batteries should not be charged with a TinyScreen plus, as the charge current is too high (200mA). They should be charged using a standard TinyDuino Processor or Tiny Battery Charger (100mA).

    DOWNLOADS

    Customer Reviews

    Based on 9 reviews
    89%
    (8)
    0%
    (0)
    11%
    (1)
    0%
    (0)
    0%
    (0)
    J
    Jaime DuBan
    Replaced original battery that came with Epson 3D Glasses ELPGS03. A bit bigger than the original.

    Replaced original battery that came with Epson 3D Glasses ELPGS03. A bit bigger than the original and does the job.

    O
    Olavi Vesanen
    For my Epson 3D Glasses

    I used this to replace an old battery in ELPGS03 glasses. This one was the exact replacement. The order was easy to do and delivery process was fast even to Finland.

    J
    Jonas Elm
    Perfect for my 3D Glasses

    Both my Epson 3D Glasses went in to problems with the charging after a few years. Original batterys where just 30mAh. After som googling I found these. With a bit of patience I manage to take the glasses apart and change the battery inside. Now they working perfect again and with 70mAh I don't need to charge them as often as the old ones. Thanks to Tiny Circuits for the fast shipping.

    123