Best Selling Products


Matrix LED TinyShield

$ 19.95

The Matrix LED TinyShield is a 6 x 9 grid of LEDs (54 total LEDs) that are individually addressable, which lets you scroll text, draw images and all sorts of other things.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 1100mAh at 3.7V.

Learn More →



Measure light with your TinyDuino - this TinyShield features a TAOS TSL2572 Ambient Light Sensor, that approximates human eye response to light intensity under a variety of lighting conditions and through a variety of attenuation materials.

Learn More →



TinySaber

$ 24.95

Defend the galaxy with the new TinySaber! Built around the ATtiny841 microcontroller, this product features sixteen vibrant SK6812mini RGB LEDs, capacitive touch sensors, an accelerometer, and a micro-USB port for battery charging and device programming.

Learn More →



This is the same connector that can be found on our batteries and speakers. This connector is pre-wired with your choice of 50mm or 100mm wire length.

Learn More →



This TinyShield has two analog joysticks on both sides, plus two push buttons along the top, to create a tiny joystick controller for your TinyDuino.

Learn More →



Compose a tiny tune with the new TinyPiano! Built around the ATtiny841 microcontroller, this product features 9 capacitive touch sensors, 10 pre-loaded Nokia style ringtones, a loud magnetic buzzer, and simple coin cell power.

Learn More →



Connect up your TinyLily Mini to standard battery packs that use the JST SH connector (the kind that we sell at TinyCircuits). You can also use this without the JST connector with two large through holes to connect to an external power supply or battery pack.

Learn More →



A nice tiny washable switch (the switch itself is just 3x3mm) in an extremely compact size and incredibly thin. This is a momentary push switch, the two contacts are connected when the switch is pushed and open when it’s released.

Learn More →



Add robust storage memory to your TinyDuino with this EEPROM TinyShield. Build around the Microchip 24FC1025, this is Electrically Erasable PROM (EEPROM) is a simple way to add robust memory storage to your projects and is very low power.

Learn More →



A standard size LED in an extremely compact size of 10.2mm x 4mm, with two standard TinyLily sewtabs and a current limiting resistor, so you don’t have to worry about blowing it up or adding an external resistor.

Learn More →



This is a tiny rechargeable Lithium ion polymer battery that fits perfectly behind the TinyDuino Processor board to power your projects. The battery has a capacity of 70mAh at 3.7V.

Learn More →



When TI came out with the world’s smallest DC motor driver chip, we knew we had to build a board around it. Based around the 2mm x 2mm TI DRV8837 Motor Driver (H-Bridge) IC, this board is incredibly tiny at only 10mm in diameter, yet can drive a 5V 500mA motor!

Learn More →



The TinyLily Mini USB Adapter lets you program your TinyLily Mini processor, provides power, and can be used for communication

Learn More →



The 16 Edge LED TinyShield allows some cool and easy LED indications using only five I/O signals. The 16 LEDs are mounted around the outside of the board, and can easily be seen even when the LED board is in the middle of a TinyShield stackup.

Learn More →



This Tiny Video Player Kit lets you create a TinyScreen+ video player in an extremely small form factor.

Learn More →



This TinyShield features the high performance and lower power ST L3G4200D 3-axis gyroscope. The L3G4200D allows measurement of angular rates in three axes. There is also an integrated temperature sensor built in.

Learn More →



This TinyZero IoT Kit lets you get started creating an Internet of Things (IoT) project.

Learn More →



The Motor x4 TinyShield allows you to drive four independently controlled DC brushed motors from your TinyDuino!

Learn More →



Compose a tiny tune with the new Tiny Violin! Built around the ATtiny841 microcontroller, this product features 9 capacitive touch sensors, 10 pre-loaded Nokia style ringtones, a loud magnetic buzzer, and simple coin cell power.

Learn More →



This is the 3D printed enclosure (both the top and bottom haff), and a watch wrist strap to use to create a TinyScreen Smart Watch.

Learn More →



The Servo TinyShield allows you to drive four independently controlled Servos from your TinyDuino! An external power connection is supplied to connect up to your power source (like a battery).

Learn More →



This TinyZero Basic Kit has the bare essentials to get going with the TinyZero! This kit comes with a TinyZero processor with accelerometer option, a Proto Board TinyShield and a 150mAh Lithium Polymer battery.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 500mAh at 3.7V.

Learn More →



This proto board brings many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

Learn More →



This TinyDuino Starter Kit is a great way to start with your TinyDuino and begin creating some cool projects! This kit comes with a TinyDuino processor with lithium battery support, a USB TinyShield, a 16 Green LED TinyShield, three Proto Board TinyShields and a 140mAh Lithium Polymer battery.

Learn More →



This proto board brings many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

Learn More →



This proto board brings every one of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 2mm spacing, so a standard 2mm header can be used if desired.

Learn More →



This TinyShield features four of our popular TinyShield Sensors on a single board!

Learn More →



Is your TinyDuino looking a little bare? Stick it in a plastic enclosure box to protect it and give your project a clean look! This enclosure box is made of sturdy black plastic, which makes it easy to cut and drill. It also makes this little box tough! The two halves are assembled with two steel screws to hold it together.

Learn More →



Is your TinyDuino looking a little bare? Stick it in a plastic enclosure box to protect it and give your project a clean look! This enclosure box is made of sturdy black plastic, which makes it easy to cut and drill. It also makes this little box tough! The two halves are assembled with two steel screws to hold it together.

Learn More →



Add motion to your TinyDuino project! This gear motor uses the same JST connector that can be found on our Dual Motor TinyShield, meaning it can be plugged right in without any soldering or crimping.

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 850mAh at 3.7V.

Learn More →



This is the best 2.5g servo we've found so far. If you need high torque and precision in a truly tiny package, this is the one to get. It is a digital servo so position accuracy is second to none.

Learn More →



This TinyShield is designed specifically for the TinyScreen+ to allow for video playback in a very compact package.

Learn More →



Add sound to your TinyDuino project! This speaker uses the same JST connector that can be found on our microSD and Audio TinyShield, meaning it can be plugged right in without any soldering or crimping

Learn More →



This is a rechargeable Lithium ion polymer battery that works perfectly with the TinyDuino Processor board to power your projects. The battery has a capacity of 1000mAh at 3.7V.

Learn More →



This is one of the easiest ways to add some color to your TinyDuino project. These crystal clear 3mm LEDs are already wired with a built in current limiting resistor, so all you need to do is solder the pre-tinned wires to a power source.

Learn More →



These connectors are commonly used on micro servos and other RC equipment. You can use it supply power or PWM signals to or from your TinyDuino Project and interface with standard lightweight radio control components

Learn More →



This SRAM Tinyshield allows you to add memory to your TinyDuino projects that can read and write at a virtually instant rate. Built around the Microchip 23LC1024, this board allows for some extra processing memory when your Arduino device is powered on.

Learn More →



This radio TinyShield is based around the very popular Nordic NRF24L01+ radio transceiver. The TinyShield is set to operate at 2.4GHz, can transmit at up to 2Mbps, and is very easy to use. This transceiver allows for long range communication between radios and is designed for an open field range of up to 500 meters

Learn More →



This TinyLily Sewable sensor board features the high performance and low power Bosch BMA250 3-axis accelerometer. The BMA250 allows measurement of accelerations in three perpendicular axes and thus senses tilt, motion, shock, and vibration in your projects.

Learn More →



If you need high torque and precision in a tiny package, this is the servo to get. It is a digital servo so position accuracy is second to none.

Learn More →



Sometimes you need a good old fashioned breadboard to easily test a circuit. Now you can make truly minuscule prototypes using these miniature breadboards.

Learn More →



This rechargeable Lithium Ion Polymer Battery is a cylindrical 18650 cell that is typically used in everything from small flashlights to electric cars. The battery has a capacity of 2500mAh at 3.7V, the voltage can range from 4.2V when fully charged to 3.0V when completely discharged.

Learn More →



Need a way to mount our gear motors to your project? Look no further. This plastic mount holds the motor tight and mounts securely with two included screws and nuts.

Learn More →



Sometimes you need a good old fashioned breadboard to easily test a circuit. Now you can make compact prototypes using these mini breadboards.

Learn More →



Add motion to your TinyDuino project! This wheel has a grippy rubber tire for good traction and has a strong plastic center hub, which makes it perfect for robotics projects.

Learn More →