Best Selling Products


TinyLily Mini Starter Kit

$ 39.95

This TinyLily Mini Starter Kit lets you really get going to create some cool projects with the TinyLily Mini!

Learn More →



What project would be complete without magnets? These magnets can help you do anything from hold something shut, to detecting the position of something with a hall effect sensor. They're neodymium magnets, so don't let their small size fool you. They pack a big punch!

Learn More →



This is the same connector that is used on servos and other RC equipment. You can use it supply power or PWM signals to or from your TinyDuino Project and interface with standard radio control components.

Learn More →



TinyLily RGB LED

from

$ 1.95

This sewable board features a 5mm RGB LED, enabling you to add 24-bit resolution color to your Tiny Project! This LED has a built in driver IC, so it requires special libraries and serial data, not just applied voltage.

Learn More →





Add motion to your TinyDuino project! This gear motor uses the same JST connector that can be found on our Dual Motor TinyShield, meaning it can be plugged right in without any soldering or crimping.

Learn More →



This TinyLily Mini Basic Kit has the bare essentials to get going with the TinyLily e-Textile system.

Learn More →



If you need high torque and precision in a small package, this is the servo to get. It is a digital servo so position accuracy is second to none, and it has metal gears.

Learn More →



Add motion to your TinyDuino project! This wheel has a grippy rubber tire for good traction and has a strong plastic center hub, which makes it perfect for robotics projects.

Learn More →



This adapter allows you to drive standard 12mm hex RC wheels or anything else that uses a 12mm hex drive.

Learn More →



Create your own electronics projects in minutes with the Crazy Circuits Starter Set. Design your own projects from scratch or follow one of our many Project Guides. Add Crazy Circuits parts to any LEGO™ project to make it light up. Use the included conductive thread to create eye catching wearables.

Learn More →



Start designing your own interactive and programmable projects with the Crazy Circuits Deluxe Set. Use the included Touch Board to turn any conductive material into an interactive surface. Add parts and programing to your next LEGO ™ project to give it dazzling effects.

Learn More →





This TinyLily LED Variety Pack includes a mixture of all of our sewable LEDs so you can create some really cool wearable projects.

Learn More →





This Sewing Kit with Conductive Thread has the bare essentials to get you going on your next wearable project!

Learn More →



Spun from stainless steel fiber you can use it as a creative way to connect various electronics onto clothing projects. These spools are a great way to get into wearable electronics.

Learn More →



This Whisker is a Near Field Communication (NFC) Reader. The MFRC522 is a highly integrated reader/writer IC for contactless communication at 13.56 MHz. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE and NTAG.

Learn More →



This Whisker gives your project heat-vision in an 8x8 array of temperature output using the Infrared Array Sensor Grid-EYE AMG8833 sensor! This can be used to detect the passage of humans, animals, and keep track of how hot your PC is getting.

Learn More →



Includes 0.1" connections for GND, 3V3, SCL, SDA, and INT so that you can connect any I2C device, button, or other device into a Whisker project.

Learn More →



This Whisker lets you display text and images via a 0.42" OLED Display! This 72x40 pixel screen features white pixels on a black background and is controlled via the I²C bus.

Learn More →



This Whisker lets you display text and images via a 0.49" OLED Display! This 64x32 pixel screen features white pixels on a black background and is controlled via the I²C bus.

Learn More →



This Whisker uses the AST7527MATRQ buzzer to give you the ability to add a variety of tones to your next project!

Learn More →



This Whisker uses the NCP2820 to amplify audio. With more than 90% efficiency, this low-power amplifier will save the lifetime of your battery.

Learn More →



This Whisker lets you display text and images via a 0.96" OLED Display! This 128x64 pixel screen features white pixels on a black background and is controlled via the I²C bus.

Learn More →



This Whisker features the ATtiny25, a high performance, low-power AVR 8-bit controller. Moisture is detected using capacitance to measure dielectric permittivity of the surrounding medium.

Learn More →



This Whisker lets you measure Temperature, Pressure, Humidity, and Volatile Organic Compounds (VOCs) via the BME680.

Learn More →



This TinyShield is the heart of the Whisker line. Featuring a 4-channel Multiplexer, on-board voltage regulation and level shifting, this board allows you to add up to 4 Whiskers to your project with ease!

Learn More →



This Arduino Shield allows users to add Whiskers to their Standard Arduino projects. Featuring a 4-channel Multiplexer, Real Time Clock (RTC), on-board voltage regulation and level shifting, this board allows you to add up to 4 Whisker Boards to your project with ease!

Learn More →



This Pi Hat allows users to add Whiskers to their Pi projects. Featuring a 4-channel Multiplexer, Real Time Clock (RTC), on-board voltage regulation and level shifting, this board allows you to add up to 4 Whisker Boards to your project with ease!

Learn More →



WhiskerZero is one of TinyCircuits' second generation processor boards, specifically designed for low-cost Whisker projects. WhiskerZero is based on the Atmel SAMD21 32-bit ARM Cortex M0+ processor (the same one used in the Arduino Zero) and provides a USB connectivity port, power management and battery charger in a single 15x32mm board.

Learn More →



This Whisker uses the same slide switch found on our TinyArcade Kit, as a simple logic level switch. Use this board to mechanically choose between HIGH or LOW

Learn More →



This Whisker features a VL53L0X Infrared Time-of-Flight sensor, most often used for distance detection between 2cm and 2m!

Learn More →



This Whisker features the PCT2075 Temperature Sensor. This sensor has a range of -55°C up to 125°C and communicates over the I²C bus.

Learn More →



RobotZero is one of TinyCircuits' second generation processor boards, adding performance upgrades and additional features to the original TinyDuino including (4) Whisker connectors, (2) motor ports, (4) servo ports, and a built in 9-Axis sensor.

Learn More →



This Whisker uses the SPW2430 MEMS Microphone to detect sound and outputs an analog signal that can be read by the TinyDuino.

Learn More →



This Whisker uses our larger momentary pushbutton. Program this as an interrupt to run asynchronous functions within your code loop.

Learn More →



This Whisker lets you measure Humidity and Pressure via the BME280. This sensor is an upgrade from the BMP280 used on our Barometric Pressure TinyShield because it also includes a Humidity Sensor

Learn More →



This Whisker features a 10-position Rotary Encoder which could be used as a discrete setting adjustment or anything else you can think of! This board outputs digital signals via an I²C I/O expander.

Learn More →



RGB LED Whisker

from

$ 1.95

This Whisker features a 3.5mm Serial RGB LED, enabling you to add 24-bit resolution color to your Tiny Project! This LED has a built-in driver IC, so it requires special libraries and serial data, not just applied voltage. This version also features a second connector, allowing you to string multiple LEDs together!

Learn More →



This Whisker lets you measure your heartbeat via the MAX30101 pulse sensor. The sensor package features internal LEDs, photodetectors, optical elements, and low-noise electronics.

Learn More →



This Whisker lets you read the input from a simple tact momentary switch, because what would an electronics project be without a basic push-button?

Learn More →



This Whisker lets you display text and images via a 0.69" OLED Display! This 96x16 pixel screen features white pixels on a black background and is controlled via the I²C bus.

Learn More →



This Whisker lets you control a Linear Resonant Actuator (LRA) via the I²C bus and the DRV2605 IC, to create Haptic vibration type motion. Due to their construction and operating method, LRAs outlast traditional vibration motors several times over and are tuned to operate at frequencies that are optimal for skin contact.

Learn More →



This Whisker lets you measure ambient light levels via the TSL2572, the same sensor on our Ambient Light TinyShield.

Learn More →



This Whisker lets you use a discrete joystick for inputs to your TinyDuino! This Up, Down, Left, Right joystick board interfaces with an I2C I/O expander to be read by the TinyDuino (or other TinyCircuits processor of choice).

Learn More →



This Whisker lets you receive Infrared signals in the 38 kHz range, standard for most TV and appliance remotes. This sensor demodulates the 38 kHz carrier frequency and outputs only the High-Low signals, making it easily integrable with existing Arduino libraries. Well documented and easy to use IR protocols include the Sony, Sharp and NEC protocols, often included in Arduino IR Libraries.

Learn More →



This Whisker lets you measure the intensity of magnetic fields via the A1454 Linear Hall Effect Sensor or the TCS40DLR Discrete Hall Switch. This particular version of the A1454 is intended to be used with ferrite type magnets.

Learn More →