Discontinued


This TinyShield lets you measure 9 degrees of freedom (9DOF) with your TinyDuino and features the InvenSense MPU-9150 - a system-in-package featuring a 3D digital linear acceleration sensor, a 3D digital angular rate sensor, and a 3D digital magnetic sensor.

Learn More →



Connect to your smartphone or computer using Bluetooth Low Energy. The Bluegiga module used on this TinyShield can support both master and slave modes.

Learn More →



Connect to your smartphone or computer using Bluetooth Low Energy. The Nordic chipset used on this TinyShield only supports slave mode.

Learn More →



Using the miniature Roving Network / Microchip RN42 Bluetooth 2 Module, easily lets you communicate wirelessly with your TinyDuino via a standard serial port from your computer using Bluetooth SPP (Serial Port Profile Mode).

Learn More →



The Motor x4 TinyShield allows you to drive four independently controlled DC brushed motors from your TinyDuino!

Learn More →



This proto board brings every one of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 2mm spacing, so a standard 2mm header can be used if desired.

Learn More →



This proto board brings many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

Learn More →



This proto board brings many of the TinyShield signals out to a point that you can solder to. All of the signals are marked and are spaced with 0.1″ spacing (same spacing as on the standard Arduino Uno), so a standard 0.1″ header can be used if desired.

Learn More →



Connect you projects up to the internet with the WiFi TinyShield! Based on the TI CC3000 WiFi module, this module supports 802.11b/g, different security modes (None, WEP, WPA and WPA2) and has a built in TCP/IP Stack

Learn More →