Ribbon Cable Extender TinyShield


29 in stock

  • Free Shipping for orders over $50
  • Available Worldwide


    This kit allows TinyShields to be spaced apart from one another. Using two flat flex ribbon cable boards, you can now place your TinyScreen or any other TinyShield remote from the main TinyDuino stack. This kit includes two Ribbon Cable TinyShield boards and one 6 inch ribbon cable. 

    To learn more about the TinyDuino Platform, click here


        Pins Supported

        • All Shield signals supported
        • VCC, VBATT,+3V3, +5V, VIN, GND, RSV2, RSV1, RSV0, RESET, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, SS, MOSI, MISO, SCK, AREF, A0, A1, A2, A3, A4/SDA, A5/SDL


        • Boards: 20mm x 20mm (.787 inches x .787 inches)
        • Board Max Height (With Top Connector): (from lower bottom TinyShield Connector to upper PCB level): 5.11mm (0.201 inches)
        • Ribbon Cable: 150mm x  15.9mm (5.9 inches x .625 inches)
        • Weight (each Board): 1.05 grams (0.04 ounces)
        • Weight (Ribbon Cable): 0.85 grams (0.03 ounces)



          Related Items

          Micro USB Cable - 3 Feet - TinyCircuits
          Micro USB Cable - 3 Feet
          This is a standard USB A to micro B USB cable, which can be use to connect up your TinyDuino or TinyLily to your computer. 3 feet / 1 meter long.
          2 Pin Connector JST-SH Female - TinyCircuits
          2 Pin Connector JST-SH Female
          This is the same connector that can be found on our batteries and speakers. This connector is pre-wired with your choice of 50mm or 100mm wire length.