Note: This item is currently only available on Kickstarter, it will be for sale on our site after the Kickstarter is complete and rewards have been fulfilled
This Wirelingr uses the NCP2820 to amplify audio. With more than 90% efficiency, this low-power amplifier will save the lifetime of your battery.
Optimized PWM output stage: filterless capability
Ultra-fast start-up time 1ms
External gain configuration capability
"Pop and click" noise protection circuitry
Internally generated 250 kHz Switching frequency
TinyDuino Power Requirements
Voltage: 3.0V - 5.5V
Current: 2.5 mA (Typical Quiescent Current Mode).
A5/SCL - I²C Serial Clock line
A4/SDA - I²C Serial Data line
9mm x 16mm (.35 inches x .63 inches)
Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 3.70mm (0.15 inches)
Weight: 1 gram (.04 ounces)
You can also use this shield without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice!