Flash Memory TinyShield

ASD2202-R-F

15 in stock


  • Free Shipping for orders over $50
  • Available Worldwide


  • DESCRIPTION

    Add robust, lightning-fast storage memory to your TinyDuino with this Flash Memory TinyShield.  Built around the Winbond W25Q80DV, this board is a simple way to store settings, logs, or any other data your project needs to keep through power cycles.

    The Flash Memory TinyShield is low power and works through the SPI interface. It has 1 MB of storage and is byte addressable.  Example code is provided to make it simple to add flash memory support to your projects.  

    To learn more about the TinyDuino Platform, click here

      TECH SPECS

      To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix

      Winbond W25Q80DV Flash Specs

      • 1024K x 8 (8 Mbit)
      • 256-Byte Page Write Buffer
      • Page Write Time 0.8 ms typical
      • Write Endurance: 100,000
      • Data Retention: 20+ Years

      TinyDuino Power Requirements

      • Voltage: 2.7V - 5.5V 
      • Current:
        • Standby: 10uA
        • Read: 7mA
        • Write: 20mA
        • Due to the low current, this board can be run using the TinyDuino coin cell option.

      Pins Used

      • 05 - SPI_CS: This signal is the SPI chip select for the flash memory.
      • 11 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the flash memory.
      • 12 - MISO: This signal is the serial SPI data out of the flash memory and into the TinyDuino.
      • 13 - SCLK: This signal is the serial SPI clock out of the TinyDuino and into the flash memory.

      Dimensions

      • 20mm x 20mm (.787 inches x .787 inches)
      • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
      • Weight: 1.11 grams (.039 ounces)

      NOTES

      • The "Write-Protect" feature has been permanently disabled for this chip. 

      DOWNLOADS

      LEARN

      Flash Memory TinyShield
      This TinyShield lets you add robust, lightning-fast storage memory to your TinyDuino project. Built around the Winbond W25Q80DV, this board is a simple way to store settings, logs, or any other data your project needs to keep through power cycles.


      Related Items

      TinyDuino Processor Board with Lithium battery support ASM2001-R-L
      TinyDuino Processor Board
      The TinyDuino is an Arduino compatible board in an ultra compact package. This is a core processor module used in TinyDuino projects, and uses an ...
      TinyDuino Mounting Hardware Kit 12 spacers, 4 screws, 4 nuts, ASH1002
      TinyDuino Mounting Hardware Kit
      Mounting kit for mounting up to 4 TinyDuino Boards / TinyShields together in a stack. This kit contains four screws, four nuts, and twelve 3mm spac...