This board makes prototyping with the TinyDuino simple! We added screw terminals to every one of the signals available so you can create projects without having to solder. Just place a wire into the signal that you need and screw it down with a small screwdriver.
All of the shield signals are supported and are spaced with 0.1″ spacing. They're placed along the edge of the board, which extends past the normal width of the TinyDuino and ThinyShield boards; this enables easy access of any of the shield signals. Additional TinyShields can be placed on top of this proto board, so it can be located anywhere in your project's TinyDuino stack.
There are three options when ordering this board:
1. No Terminal Blocks – Just the board itself without the terminal blocks. You can solder or clip onto any of the signals.
2. You Install the Terminal Blocks – The terminal blocks are shipped along with the board, so you can solder them on yourself.
3. Terminal Blocks Installed – We solder the terminal blocks here and you receive the completed unit.
To learn more about the TinyDuino Platform, click here
VCC, VBATT,+3V3, +5V, VIN, GND, RSV2, RSV1, RSV0, RESET, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, SS, MOSI, MISO, SCK, AREF, A0, A1, A2, A3, A4/SDA, A5/SDL
The shield works fine, easy as pie to attach wires and string everything together.
But ... I missed this note: "The terminal blocks will make it not possible to plug a USB Cable into a Side Mount USB TinyShield. Plan to use the Top Side Mount USB TinyShield instead."
The solder joints underneath this board extend out such that you can't plug in a USB cable into the programming board undermeath it. This means you can't have this shield and the programming board on at the same time. Perhaps another solution is for this shield to be redesigned by rotating the connectors 90 degrees such that the solder joints aren't over a normal USB programming shield?
In any case, to solve this problem, search for "Top Side Mount USB TinyShield". This is a normal "USB TinyShield" but set the "USB Connector" option to "Top" $14.95.