9-Axis IMU TinyShield

ASD2511-R-N

8 in stock


  • Free Shipping for orders over $50
  • Available Worldwide



  • DESCRIPTION

    This TinyShield lets you measure 9 degrees of freedom (9DOF) with your TinyDuino and features the ST LSM9DS1 - a system-in-package featuring a 3D digital linear acceleration sensor, a 3D digital angular rate sensor, and a 3D digital magnetic sensor.

    The LSM9DS1 has a linear acceleration full scale of ±2g/±4g/±8/±16 g, a magnetic field full scale of ±4/±8/±12/±16 gauss and an angular rate of ±245/±500/±2000 dps.

    The 9 Axis TinyShield incorporates level shifters and a local power supply to ensure proper and safe operation over the entire TinyDuino operating voltage range up to 5V.

    To learn more about the TinyDuino Platform, click here


      TECHNICAL DETAILS

      To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix

      ST LSM9DS1 9-Axis DOF Specs

      • 3 acceleration channels, 3 angular rate channels, 3 magnetic field channels
      • ±2/±4/±8/±16 g linear acceleration full scale
      • ±4/±8/±12/±16 gauss magnetic full scale
      • ±245/±500/±2000 dps angular rate full scale
      • 16-bit data output
      • “Always-on” eco power mode down to 1.9 mA
      • Embedded temperature sensor
      • Embedded FIFO
      • Position and motion detection functions
      • Click/double-click recognition

      TinyDuino Power Requirements

      • Voltage: 3.0V - 5.5V 
      • Current: 4.6mA (Normal Mode).  Due to the low current, this board can be run using the TinyDuino coin cell option

      Pins Used

      • A5/SCL - I2C Serial Clock line
      • A4/SDA - I2C Serial Data line

      Dimensions

      • 20mm x 20mm (.787 inches x .787 inches)
      • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
      • Weight: 1 gram (.04 ounces)

      Notes

      • You can also use this shield without the TinyDuino – there are 0.1″ spaced connections for power, ground, and the two I2C signals along the side of the TinyShield to allow you to connect a different system.  Warning: Revision 4 boards have a mistake on the silkscreen, the pin marked VCC is actually SCL, the pin marked SCL is actually SDA, and the pin marked SDA is actually VCC. If you connect this up the way it is marked you will not damage the board. 

      Downloads


      Learn

      TinyShield 9-Axis Sensor Board Tutorial
      TinyShield 9-Axis Sensor Board Tutorial
      Learn how to use the 9-Axis Sensor TinyShield


      Related Items

      <iframe width="560" height="315" src="https://www.youtube.com/embed/MIpKnssGacs?rel=0" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
      Tiny Arcade DIY Kit
      The Tiny Arcade lets you relive the golden age of video games with an arcade cabinet that fits in the palm of your hand.

      Pocket Arcade
      Pocket Arcade
      The PocketArcade is a new, smaller way to relive the golden age of video games with a redesigned case that easily slips into your pocket!